Panasonic KX-NCP500 - Page 290

Value Range
None, 8 ´ n (n=2–112) ms
Maintenance Console Location
3.34 [1-1] Slot—Port Property - T1 Port
Programming Manual References
None
Feature Manual References
3.1.22 CPC (Calling Party Control) Signal Detection
DTMF Width
Selects the length of the DTMF tone sent to the T1 channel.
Default
80 ms
Value Range
80 ms, 160 ms
Maintenance Console Location
3.34 [1-1] Slot—Port Property - T1 Port
Programming Manual References
None
Feature Manual References
None
CO Pulse Speed
Selects the speed at which pulse dials are sent to the T1 channel.
Default
10 pulse/s
Value Range
10 pulse/s, 20 pulse/s
Maintenance Console Location
3.34 [1-1] Slot—Port Property - T1 Port
290 PC Programming Manual Document Version 2009-12
3.34 [1-1] Slot—Port Property - T1 Port