Maintenance Console Location
4.5 [2-3] Timers & Counters
Programming Manual References
None
Feature Manual References
None
Dial—Analog CO Inter-digit
Specifies the length of time within which subsequent digits of a telephone number must be sent to an analog
CO line. If no digit is sent before this time expires, the PBX recognizes end of dialing and stops muting the
caller’s voice over the analog CO line.
Default
5 s
Value Range
1–15 s
Maintenance Console Location
4.5 [2-3] Timers & Counters
Programming Manual References
None
Feature Manual References
None
Dial—Analog CO Call Duration Start
Specifies the length of time between the end of dialing and the start of the SMDR timer for outgoing analog
CO line calls.
Default
0 s
Value Range
0–60 s
Maintenance Console Location
4.5 [2-3] Timers & Counters
326 PC Programming Manual Document Version 2009-12
4.5 [2-3] Timers & Counters
To Next Page
Loading...
