Programming Manual References
4.4 [2-2] Operator & BGM
7.4 [5-3-2] Voice Message—DISA Message
8.6 [6-6] Tenant— Operator (Extension Number)
Feature Manual References
4.1.8 DISA (Direct Inward System Access)
DISA—2nd Dial Timer for AA
Specifies the length of time in which the caller must dial the second digit before the DISA AA Service activates.
Default
2 s
Value Range
0–5 s
Maintenance Console Location
4.5 [2-3] Timers & Counters
Programming Manual References
7.4 [5-3-2] Voice Message—DISA Message
Feature Manual References
4.1.8 DISA (Direct Inward System Access)
DISA—Intercept Timer—Day, Lunch, Break, Night
Specifies the length of time until an unanswered DISA call is intercepted and redirected to the intercept routing
destination after the original destination receives the call in each time mode.
Default
40 s
Value Range
0–60 s
Maintenance Console Location
4.5 [2-3] Timers & Counters
Programming Manual References
6.1 [4-1-1] Wired Extension—Extension Settings—Intercept Destination—
Intercept Destination—When
called party does not answer—Day, Lunch, Break, Night
6.10 [4-2-1] Portable Station—Extension Settings—Intercept Destination— Intercept Destination—When
called party does not answer—Day, Lunch, Break, Night
332 PC Programming Manual Document Version 2009-12
4.5 [2-3] Timers & Counters
To Next Page
Loading...
