Extension Dial Lock Set / Cancel
Specifies the feature number used to lock or unlock an extension to make certain CO line calls and change
the forwarding destination, using the Extension Dial Lock feature.
Default
*77
Value Range
Max. 4 digits (consisting of 0–9, *, and #)
Maintenance Console Location
4.9 [2-6-1] Numbering Plan—Main
Programming Manual References
None
Feature Manual References
5.1.4 Extension Dial Lock
Time Service (Day / Lunch / Break / Night) Switch
Specifies the feature number, available for manager extensions, used to change the time mode manually.
Default
*780
Value Range
Max. 4 digits (consisting of 0–9, *, and #)
Maintenance Console Location
4.9 [2-6-1] Numbering Plan—Main
Programming Manual References
4.12 [2-7-1] Class of Service—COS Settings—Programming & Manager—
Time Service Switch
4.12 [2-7-1] Class of Service—COS Settings—Programming & Manager— Manager
Feature Manual References
17.1.5 Time Service
Remote Extension Dial Lock Off
Specifies the feature number, available for manager extensions, used to unlock other extensions using the
Extension Dial Lock feature.
Default
*782
Document Version 2009-12 PC Programming Manual 379
4.9 [2-6-1] Numbering Plan—Main
To Next Page
Loading...
