Default
On (Solid)
Value Range
On (Solid): Red on
Flash: Slow red flashing
Maintenance Console Location
4.18 [2-9] System Options
Programming Manual References
6.3 [4-1-2] Wired Extension—FWD/DND
6.12 [4-2-2] Portable Station—FWD/DND
Feature Manual References
6.1.7 FWD/DND Button, Group FWD Button
10.1.1 LED Indication
PT Fwd / DND—Fwd/DND key mode when Idle
Selects the function of the FWD/DND button (fixed button) when it is pressed in idle status. (A FWD/DND button
customized on a flexible button is always in FWD/DND Cycle Switch mode, and the mode cannot be changed.)
Default
FWD/DND Setting Mode
Value Range
FWD/DND Setting Mode: Enter programming mode for the FWD/DND setting.
FWD/DND Cycle Switch: Switch the FWD on/DND on/Off mode instead of entering the programming mode
for the FWD/DND setting. (When there are separate FWD/DND settings for calls from CO lines and calls from
extensions, mode switching cannot be performed.)
Maintenance Console Location
4.18 [2-9] System Options
Programming Manual References
6.3 [4-1-2] Wired Extension—FWD/DND
6.12 [4-2-2] Portable Station—FWD/DND
Feature Manual References
6.1.7 FWD/DND Button, Group FWD Button
PT Fwd / DND—Paging to DND Extension
Specifies whether extensions can receive paging when in DND mode.
Document Version 2009-12 PC Programming Manual 415
4.18 [2-9] System Options
To Next Page
Loading...
