Default
µ-Law
Value Range
A-Law, µ-Law
Maintenance Console Location
4.18 [2-9] System Options
Programming Manual References
None
Feature Manual References
None
CODEC—Network CODEC
Selects the codec type for ISDN or T1 lines.
Default
µ-Law
Value Range
A-Law, µ-Law
Maintenance Console Location
4.18 [2-9] System Options
Programming Manual References
None
Feature Manual References
None
End of Dial Plan—[#] as End of Dial for en Bloc mode
Specifies whether to automatically send "#" as an end code when dialing to an ISDN line; if used as the end
code, "#" will not be dialed out as part of a number even when the "#" key is pressed.
Default
Enable
Value Range
Disable, Enable
Document Version 2009-12 PC Programming Manual 421
4.18 [2-9] System Options
To Next Page
Loading...
