EasyManua.ls Logo

Panasonic KX-NCP500 - Page 434

Panasonic KX-NCP500
892 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Maintenance Console Location
4.18 [2-9] System Options
Programming Manual References
None
Feature Manual References
13.1.18 Private Network Features—Network ICD Group
9.1.4 ICD Group Features—Outside Destinations
Private Network—Public Call through Private Network—Minimum Public Caller
ID Digits
Specifies the minimum length of Caller ID required for a call from a private network to be considered as a call
from a public network.
Default
9
Value Range
0–15
Maintenance Console Location
4.18 [2-9] System Options
Programming Manual References
None
Feature Manual References
3.1.3 Caller ID
Private Network—TIE Call by Extension Numbering (Activation Key Required)
Enables extensions at two PBXs connected in a network (not including a VoIP network) to have the same
leading number. For example, extension 101 is registered at PBX 1, and extension 102 is registered at PBX
2. Only the Extension Number Method is supported.
If disabled, different leading numbers need to be assigned for extensions at each PBX.
Default
Disable
Value Range
Disable, Enable
Maintenance Console Location
4.18 [2-9] System Options
434 PC Programming Manual Document Version 2009-12
4.18 [2-9] System Options

Table of Contents

Other manuals for Panasonic KX-NCP500

Related product manuals