Feature Manual References
None
Extension Name
Specifies the name of the extension.
Default
Not stored.
Value Range
Max. 20 characters
Maintenance Console Location
6.1 [4-1-1] Wired Extension—Extension Settings
Programming Manual References
None
Feature Manual References
None
Outgoing Preferred Line
Selects the line to be seized after going off-hook to make a call.
Default
ICM/PDN
Value Range
No Line: No line is seized.
Idle: An idle CO line is seized automatically from the programmed trunk groups.
ICM/PDN: An extension line is seized, or, for a PDN extension, an idle PDN button is selected.
F-1–F-84: A CO line programmed for a flexible button (F-1–F-84) is seized. A flexible button customized as a
Single-CO, Group-CO, Loop-CO, or ICD Group button must be selected.
Maintenance Console Location
6.1 [4-1-1] Wired Extension—Extension Settings
Programming Manual References
6.5 [4-1-4] Wired Extension—Flexible Button
Feature Manual References
10.1.3 Line Preference—Outgoing
Document Version 2009-12 PC Programming Manual 563
6.1 [4-1-1] Wired Extension—Extension Settings
To Next Page
Loading...
