Dial (for One-touch)
Specifies the number to be dialed. The PBX can have a maximum of 2000 One-touch Dialing buttons for
extensions and DSS Consoles.
Default
Not stored.
Value Range
Max. 32 digits (consisting of 0–9, *, #, T [Transfer], [ ] [Secret], P [Pause], and F [Flash])
Maintenance Console Location
6.5 [4-1-4] Wired Extension—Flexible Button
Programming Manual References
None
Feature Manual References
12.1.4 One-touch Dialing
Dial (for NDSS)
Specifies the network extension number of the extension to be accessed using Network Direct Station
Selection.
Note that only extension numbers that have been previously registered in 11.4 [9-4] NDSS Key Table can be
specified here.
Default
Not stored.
Value Range
Max. 16 digits (consisting of 0–9, *, #, T [Transfer], [ ] [Secret], P [Pause], and F [Flash])
Maintenance Console Location
6.5 [4-1-4] Wired Extension—Flexible Button
Programming Manual References
None
Feature Manual References
13.1.17 Private Network Features—NDSS (Network Direct Station Selection)
Label Name
Specifies the name of each flexible button on the KX-NT366 IP-PT. The name specified here is displayed on
the LCD next to each button. A maximum of 48 flexible buttons can be customized for this extension.
Document Version 2009-12 PC Programming Manual 609
6.5 [4-1-4] Wired Extension—Flexible Button
To Next Page
Loading...
