Extension Name
Specifies the name of the PS.
Default
Not stored.
Value Range
Max. 20 characters
Maintenance Console Location
6.10 [4-2-1] Portable Station—Extension Settings
Programming Manual References
3.39 [1-2] Portable Station—
Extension Name
Feature Manual References
None
Outgoing Preferred Line
Selects the line to be seized after going off-hook to make a call.
Default
ICM/PDN
Value Range
No Line: No line is seized.
Idle: An idle CO line is seized automatically from the programmed trunk groups.
ICM/PDN: An extension line is seized, or, for a PDN extension, an idle PDN button is selected.
F-1–F-12: A CO line programmed for a flexible button (F-1–F-12) is seized. A flexible button customized as a
Single-CO, Group-CO, Loop-CO, or ICD Group button must be selected.
Maintenance Console Location
6.10 [4-2-1] Portable Station—Extension Settings
Programming Manual References
6.13 [4-2-3] Portable Station—Flexible Button
Feature Manual References
10.1.3 Line Preference—Outgoing
Incoming Preferred Line
Selects the line on which an incoming call is answered after going off-hook.
Note that even if a specific PDN button is selected here, a call ringing at any PDN button on the extension will
be answered when going off-hook.
Document Version 2009-12 PC Programming Manual 641
6.10 [4-2-1] Portable Station—Extension Settings
To Next Page
Loading...
