Maintenance Console Location
6.13 [4-2-3] Portable Station—Flexible Button
Programming Manual References
4.12 [2-7-1] Class of Service—COS Settings—TRS
Section 9 [7] TRS
Feature Manual References
17.1.6 TRS (Toll Restriction)
4.1.5 Dial Tone Transfer
Parameter Selection (for Time Service - Automatic/Manual)
Specifies the Time Table to be used when the Time Service Switching Mode is set to Automatic.
Default
1
Value Range
1–8
Maintenance Console Location
6.13 [4-2-3] Portable Station—Flexible Button
Programming Manual References
4.6 [2-4] Week Table
Feature Manual References
17.1.5 Time Service
Parameter Selection (for SDN)
Specifies the delayed ringing setting for calls arriving at an SDN button.
The value specified here is only used when
System Wireless—SDN Delayed Ringing with LCD on
4.18 [2-9] System Options is set to "Enable".
Default
Immediate
Value Range
Immediate, 1 Ring, 2 Rings, 3 Rings, 4 Rings, 5 Rings, 6 Rings, No Ring
Maintenance Console Location
6.13 [4-2-3] Portable Station—Flexible Button
Document Version 2009-12 PC Programming Manual 667
6.13 [4-2-3] Portable Station—Flexible Button
To Next Page
Loading...
