Feature Manual References
None
Simplified Voice Message
Selects which card (IPCMPR or ESVM) to use to store and play back greetings and messages for the extension.
Each extension must be assigned to a specific card and block within the card, and can only use the assigned
card/block. If two cards are used in the PBX, you should assign a number of extensions to each card, to ensure
that the necessary resources, such as message recording space, are available for each extension.
Default
Card1(A)
Value Range
None, Card1(A), Card1(B), Card2(A), Card2(B)
Maintenance Console Location
6.16 [4-2-5] Portable Station—Simplified Voice Message
Programming Manual References
None
Feature Manual References
16.1.8 SVM (Simplified Voice Message)
Maximum of SVM Log
Specifies the maximum number of voice messages (not including greeting messages) that can be stored for
the extension.
Default
10
Value Range
1–100
Maintenance Console Location
6.16 [4-2-5] Portable Station—Simplified Voice Message
Programming Manual References
None
Feature Manual References
16.1.8 SVM (Simplified Voice Message)
Document Version 2009-12 PC Programming Manual 681
6.16 [4-2-5] Portable Station—Simplified Voice Message
To Next Page
Loading...
