Programming Manual References
5.1 [3-1-1] Trunk Group—TRG Settings
Feature Manual References
3.1.16 CO Line Access
Parameter Selection (for Call Park)
Specifies whether a call is parked in an idle parking zone automatically or in a specific parking zone.
Default
Automatic
Value Range
Automatic, Specific
Maintenance Console Location
6.17 [4-3] DSS Console
Programming Manual References
None
Feature Manual References
3.1.7 Call Park
Parameter Selection (for Log-in/Log-out)
Specifies which incoming call distribution groups that the paired extension belongs to are logged in to or logged
out from.
Default
None
Value Range
None: The incoming call distribution group is selected manually.
All: All incoming call distribution groups that the paired extension belongs to.
Incoming Group: A pre-specified incoming call distribution group
Maintenance Console Location
6.17 [4-3] DSS Console
Programming Manual References
None
684 PC Programming Manual Document Version 2009-12
6.17 [4-3] DSS Console
To Next Page
Loading...
