Maintenance Console Location
7.1 [5-1] Doorphone
Programming Manual References
4.6 [2-4] Week Table
Feature Manual References
4.1.12 Doorphone Call
17.1.3 Tenant Service
COS
Specifies the Class of Service (COS) number. COS programming determines the doorphone ports that are
able to make CO line calls, and sets restrictions on intercom calls from certain extensions (Internal Call Block).
Default
1
Value Range
1–64
Maintenance Console Location
7.1 [5-1] Doorphone
Programming Manual References
4.12 [2-7-1] Class of Service—COS Settings—TRS—
TRS Level—Day, Lunch, Break, Night
4.14 [2-7-3] Class of Service—Internal Call Block
Feature Manual References
9.1.14 Internal Call Block
4.1.12 Doorphone Call
VM Trunk Group Number
Specifies the number of the VM trunk group sent to the VPS when the doorphone call destination is the floating
extension number of a VM (DPT) group.
The VM trunk group number is used to allow the VPS to send the applicable greeting message to the caller.
Default
1
Value Range
1–48
Maintenance Console Location
7.1 [5-1] Doorphone
704 PC Programming Manual Document Version 2009-12
7.1 [5-1] Doorphone
To Next Page
Loading...
