EasyManua.ls Logo

Panasonic KX-NCP500 - Page 78

Panasonic KX-NCP500
892 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Programming Manual References
3.1 [1-1] Slot
Feature Manual References
None
Card Type
Indicates the type of virtual VoIP card installed in each slot of the virtual shelf (reference only).
Default
Not stored.
Value Range
V-IPEXT32: Virtual 32-Channel VoIP Extension Card
V-SIPEXT32: Virtual 32-Channel SIP Extension Card
V-IPGW16: Virtual 16-Channel VoIP Gateway Card
V-SIPGW16: Virtual 16-Channel SIP Trunk Card
V-IPCS4: Virtual 4 IP Cell Station Interface Card
Maintenance Console Location
3.2 [1-1] Slot—Summary
Programming Manual References
3.14 [1-1] Slot—Card Property - Virtual IP Extension
3.17 [1-1] Slot—Card Property - Virtual SIP Extension
3.9 [1-1] Slot—Shelf Property - Virtual IP Gateway
3.20 [1-1] Slot—Card Property - Virtual IPCS
Feature Manual References
None
Status
Indicates the card status (reference only).
Default
Current status
Value Range
INS: The port is in service.
OUS: The port is out of service.
Fault: The port is not communicating with the network.
Pre-Install: A card has been added to the slot.
Idle: No card is installed in the slot.
78 PC Programming Manual Document Version 2009-12
3.2 [1-1] Slot—Summary

Table of Contents

Other manuals for Panasonic KX-NCP500

Related product manuals