External Modem Command—Manual Initialization 1–Manual Initialization 5
Specifies the command to manually initialize an external modem. The command specified here is controlled
by PT system programming (External Modem Control [801]).
Default
Not stored.
Value Range
Max. 30 characters
Maintenance Console Location
13.1 [11-1] Main
Programming Manual References
None
Feature Manual References
13.1.6 PC Programming
Maintenance
Local Alarm Display—Extension 1, Extension 2
Specifies the extension numbers of PTs that will be notified by the PBX about local alarms. When the PBX
detects a PBX error, the System Alarm button on the PT turns on red. When this button is pressed, the display
will show the error number, and the button light will turn off automatically.
Default
Not stored.
Value Range
Max. 5 digits (consisting of 0–9)
Maintenance Console Location
13.1 [11-1] Main
Programming Manual References
None
Feature Manual References
10.1.4 Local Alarm Information
Daily Test Start Time—Set
Enables the daily self check of the PBX for local alarm and error log.
Document Version 2009-12 PC Programming Manual 821
13.1 [11-1] Main
To Next Page
Loading...
