Panasonic KX-NCP500 - Page 825

Syslog—Major
Selects whether to output major alarm information to a syslog server.
Default
Enable
Value Range
Disable, Enable
Maintenance Console Location
13.1 [11-1] Main
Programming Manual References
None
Feature Manual References
16.1.9 Syslog Record Management
Syslog—Minor
Selects whether to output minor alarm information to a syslog server.
Default
Enable
Value Range
Disable, Enable
Maintenance Console Location
13.1 [11-1] Main
Programming Manual References
None
Feature Manual References
16.1.9 Syslog Record Management
Remote
Remote—Analog Remote (Modem) Floating Extension Number
Specifies the floating extension number for analog remote maintenance. To enable this setting, an RMT card
must be installed, and Remote—Remote Programming on this screen must be enabled.
Default
599
Document Version 2009-12 PC Programming Manual 825
13.1 [11-1] Main