Panasonic KX-NCP500 - Page 843

Programming Manual References
5.26 [3-10] Air Synchronization Group
Feature Manual References
None
CS Class
Specifies the classification of each CS within the Air Synchronization Group. This parameter can only be
modified when Connection on this screen is set to OUS.
Default
Not applicable.
Value Range
Sync Master CS1, Sync Master CS2, Sync Slave CS
Maintenance Console Location
13.6 [11-5] Air Synchronization
Programming Manual References
5.26 [3-10] Air Synchronization Group
Feature Manual References
None
Primary CS—Index
Specifies the number of the primary CS.
Default
Not applicable.
Value Range
1–16
Maintenance Console Location
13.6 [11-5] Air Synchronization
Programming Manual References
5.26 [3-10] Air Synchronization Group
Feature Manual References
None
Document Version 2009-12 PC Programming Manual 843
13.6 [11-5] Air Synchronization