Panasonic KX-NCP500 - Page 99

Value Range
Enable, Disable
Maintenance Console Location
3.4 [1-1] Slot—Card Property - IPCMPR
Programming Manual References
3.18 [1-1] Slot—Port Property - Virtual SIP Extension Port
Feature Manual References
None
DSP CODEC G.711 only (IP-GW)
Specifies whether or not to only use the G.711 codec for IP CO line calls.
Default
Disable
Value Range
Enable, Disable
Maintenance Console Location
3.4 [1-1] Slot—Card Property - IPCMPR
Programming Manual References
3.11 [1-1] Slot—Shelf Property - Virtual IP Gateway—GW Settings
Feature Manual References
None
DSP CODEC Priority-1 value only (others)
Specifies whether or not to only use the priority 1 codec set for the following types of calls:
• IP extension calls
• SIP CO line calls
Default
Disable
Value Range
Enable, Disable
Document Version 2009-12 PC Programming Manual 99
3.4 [1-1] Slot—Card Property - IPCMPR