Features Default Setting
Call Pickup Deny Allow
Call Forwarding (FWD)
*1
Off
Absent Message Off
Paging Deny Allow
Timed Reminder Cleared
Do Not Disturb (DND)
*1
Off
Call Waiting for intercom calls
*1
Call Waiting for outside calls
*1
Disable (No call)
Disable (No tone)
Executive Busy Override Deny Allow
BGM Off
Data Line Security Off
Parallelled Telephone The telephone in parallel
rings.
Log-in/Log-out Log-in
*1
These features may not be reset depending on the system programming.
Off-hook.
On-hook.
PT/SLT/PS/SIP Extn.
Enter 790.
9 07
C.Tone
• For Users in Canada Only:
After performing Extension Feature Clear, the setting of Call Waiting becomes "Enable
(Tone)". In this case, dial tone 2 will be heard when you go off-hook.
1.9.14 Clearing Features Set at Your Extension (Extension Feature Clear)
192 Operating Manual