Panasonic KX-NS1000 - 2.1.1.2 Direct In Line (DIL)

This feature cannot be used with a
single line telephone.
outside line
group no.
OR
/
8
9
0
OR
(CO)
Seize an outside line (One of
the following).
• Press the CO button.
• Dial automatic line access
number 0/9.
• Dial outside line group
access number and
outside line group number.
See "Programming" for Related
Programming if necessary.
Off-hook (One of the following).
• Lift the handset.
• Press the SP-PHONE button.
• Press the MONITOR button. (To
start talking, lift the handset.)
• Press TALK button.
Press the Call button on the
Doorphone.
On-hook (One of the following).
• Hang up.
• Press the SP-PHONE button.
• Press the MONITOR button.
• Press CANCEL button.
Press the hookswitch lightly.
Press the corresponding feature
button on the proprietary
telephone, KX-UT series SIP
phone, or S-PS.
Talk or make an
announcement.
desired no.
Enter the required number.
<Example>
account code
Enter the account code.
You will hear a busy,
confirmation, dial, ring or
ringback tone.
B. Tone: Busy Tone
C. Tone: Confirmation Tone
D. Tone: Dial Tone
R. Tone: Ring Tone
R. B. Tone: Ringback Tone
extension no.
Dial an extension number.
outside
phone no.
Dial outside phone number.
phone no.
Dial the telephone number.
dial key
Press any dial key (0–9, ,
#).
HOLD
Press the HOLD button on your
SIP phone.
REDIAL
Press the REDIAL button on
your SIP phone.
When You Use a Panasonic Proprietary Telephone or KX-UT Series SIP
Phone
Panasonic proprietary telephones and KX-UT series SIP phones have useful feature buttons that simplify
some operations. For details, refer to the "Location of Controls" or equivalent section in the documentation
for your phone.
1.1.5 Before Operating the Telephones
24 Operating Manual