Customised Buttons
If the term is in parentheses like (Account) in this manual, it means a flexible button has been made into an
"Account" button. For more information, refer to "3.1.3 Customising the Buttons" when using a PT or PS, or
"Customising the Flexible Buttons" when using Web Maintenance Console.
Note
For KX-UT series SIP phone users:
• KX-UT113/KX-UT123: Customised buttons are not available.
• Other than KX-UT113/KX-UT123: The following buttons can be customised:
– Single-CO (S-CO)
– DN
– One-touch Dialling
– Log-in/Log-out
– DSS
– Headset
– Wrap-up
– Call Park
– Call Park (Automatic Park Zone)
For S-PS users:
• The following buttons can be customised:
– Single-CO (S-CO)
– DN
– One-touch Dialling
– Log-in/Log-out
– DSS
– Wrap-up
– Call Park
– Call Park (Automatic Park Zone)
Button Feature
Loop-CO (L-CO)
Used to access an idle outside line for making outside calls.
Incoming outside calls from any outside line arrive at this button.
Group-CO (G-CO)
Used to access an idle outside line in a specified outside line group for
making outside calls.
Incoming calls from outside lines in the assigned outside line group
arrive at this button.
Single-CO (S-CO)
Used to access a specified outside line for making or receiving outside
calls.
Direct Station Selection
(DSS)
Used to access an extension with one touch.
It is also possible to be changed to the other feature button.
For KX-UT series SIP phones (except KX-UT113/KX-UT123) and S-PSs,
unlike a One-Touch button, this type of button cannot be used to dial
feature numbers.
One-touch Dialling Used to access a desired party or system feature with one touch.
Incoming Call Distribution
Group (ICD Group)
Used to access a specified incoming call distribution group for making or
receiving calls.
Message
Used to leave a message waiting indication or call back the party who
left the message waiting indication.
Message for Another
Extension
Used to have a Message button for another extension.
1.1.5 Before Operating the Telephones
Operating Manual 25
To Next Page
Loading...
