Panasonic KX-NS1000 - 2.25.2 Confirmation Tone

Parameters Steps
Message Waiting Lamp
Notification
1.
1
to change the current setting (enable or disable).
2.
2
to accept.
Device Notification for
Unreceived Messages
1.
1
to change the current setting (enable or disable).
2.
2
to accept.
External Message Delivery
1.
1
to change the current setting (enable or disable).
• If set to "Enable", go to "Prompt Mode".
2.
2
to accept.
Prompt Mode
1.
1
for Primary.
2
for System.
3
for Caller Select.
• For System, enter the system prompt number (1–8).
2.
4
to accept the current setting, then go to "External Message
Delivery".
Auto Forwarding
1.
1
to change the current setting (enable or disable).
• If set to "Disable":
The Auto Forwarding parameter is the last parameter to be
entered.
To continue assigning or editing other mailboxes, go back to
STEP B.
To finish, enter
.
2.
2
to accept.
Forwarding Mailbox Number
1.
1
to change the current setting.
2.
Enter the forwarding mailbox number.
3.
2
to accept.
Forwarding Delay Time
1.
1
to change the current setting.
2.
Enter the delay time, and
#
.
3.
2
to accept.
Forwarding Mode
1.
1
to change the current setting (Copy or Move).
2.
2
to accept, then go to "Auto Forwarding".
To delete a mailbox
The System Manager should delete mailboxes that are no longer needed. When another person accesses
the Unified Messaging system, the action is automatically cancelled.
2.2.1 System Manager Features
Operating Manual 251