Personal Custom Service
Item Description
Personal Custom Service Specifies the Personal Custom Service.
Note
• Make sure to add an outside line access number when you store
an outside telephone number.
• If you are using a PRI line, you may need to enter # at the end of
outside telephone numbers.
Follow the steps below to edit a Personal Custom Service.
1.
Click Edit.
2.
For each Key, specify an Assigned Operation.
3.
For each Assigned Operation that is specified, specify a Value
from the following.
• Transfer to specified mailbox: Allow the caller to leave
messages in a specified mailbox.
• Transfer to specified extension: Transfers the caller to a
specified extension.
• Transfer to Voice Mail Service: Allows the caller to access
Voice Mail Service.
• Transfer to Automated Attendant Service: Allows the caller to
access Automated Attendant Service.
• Transfer to specified Custom Service Menu: Transfers the
caller to the Custom Service specified here.
• Transfer to operator: Connects the caller to an operator.
• Transfer to outside (specified number): Transfers the caller to
a specified outside telephone number. Enter the outside numbers
list index (1–4).
• Page the party: Pages you.
• Repeat greeting: Repeats the greeting.
• None: No operation assigned.
4.
Click OK when finished.
3.2.1 User Programming
Operating Manual 307
To Next Page
Loading...
