Item Description
Outside Numbers Specifies the outside telephone numbers that can be used for the
"Transfer to outside (specified number)" operation in the Personal
Custom Service settings.
1.
Click Edit.
2.
Enter Outside Number #1–#4: Max. 32 digits consisting of 0–9, ,
#, and special codes:
• T: Dial Tone Detection
• ,: Dial Pause (default 1 s)
• ;: Dial Pause (default 3 s)
• 0–9,
, #: Dial Code
3.
Click OK when finished.
No DTMF Input Operation Specifies the operation taken when no DTMF input (a caller does not
dial anything) is received after the Personal Greeting:
• Recording: The caller will be guided to leave a message.
• Disconnect (All Day): The line will be disconnected, regardless of
the time of day.
• Disconnect (Only After Hours): The line will be disconnected only
after hours.
No DTMF Input Operation
Wait Time
Specifies the duration of time to wait for DTMF input before the action
set in No DTMF Input Operation is performed (0–10 s).
Personal Distribution List
Item Description
List 1–4 Members Personal Distribution Lists are used to send the same messages to
several mailboxes in a single operation. A maximum of 4 lists can be
maintained with each list containing a maximum of 40 mailboxes.
Specifies the mailbox numbers that belong to the list.
Follow the steps below to edit list members.
1.
Click Edit for a Personal Distribution List (1–4) Members item.
2.
Under Subscribers To Add, click the checkbox in No. for each
mailbox to add, referring to the mailbox numbers and mailbox
owners’ names.
3.
Click Add.
4.
Click OK.
Follow the steps below to remove members from a list.
1.
Click Edit for Personal Distribution Lists (1–4) Members item.
2.
Under Distribution, click the checkbox in No. for each mailbox to
add, referring to the mailbox numbers and mailbox owners’ names.
3.
Click Delete.
4.
Click OK.
3.2.1 User Programming
308 Operating Manual
To Next Page
Loading...
