Panasonic KX-NS1000 - 4.2.3.3 UM Group Failover

Feature (While dial tone is heard)
Default
(New)
Additional digits/buttons
*4
2.1.5 Recording Outgoing Messages
(OGM)
36
( )
– To record
1 + OGM floating extension no.
*6
[To specify a site ID]
9 + Site ID (2 digits) + 1 + OGM floating
extension no.
*6
– To play back
2 + OGM floating extension no.
*6
[To specify a site ID]
9 + Site ID (2 digits) + 2 + OGM floating
extension no.
*6
– To record from an external BGM
(MOH) port
3 + 1 + OGM floating extension no.
*6
[To specify a site ID]
9 + Site ID (2 digits) + 3 + 1 + OGM
floating extension no.
*6
– To clear
0 + OGM floating extension no.
*6
[To specify a site ID]
9 + Site ID (2 digits) + 0 + OGM floating
extension no.
*6
*4
2.1.6 Allowing Users to Seize an
Unavailable Outside Line (Trunk Busy
Out)
785
( )
outside line no. (3 digits)
*4
2.1.7 Releasing Network Direct
Station Selection (NDSS) Monitor
784
( )
another PBX extension no. + #
3.1.1 Customising Your Phone
(Personal Programming)
799
( )
Assigning an Extension PIN to
Your Extension (Extension PIN
[Personal Identification Number])
– To set
1 + extension PIN + # + same extension
PIN + #
– To cancel
0 + stored extension PIN
*1
The UM group’s default floating extension number depends on system programming. For more information, consult your System
Administrator or System Manager.
*2
Supervisor only
*3
Hotel operator only
*4
Manager only
*5
Manager and preprogrammed extension user only
*6
The default of OGM floating extension numbers depends on system programming. For more information, consult your System
Administrator or System Manager.
Feature
(While busy, DND or call tone is heard/after dialling)
Default
1.2.4 When the Dialled Line is Busy or There is No Answer
Sending a Call Waiting Notification (Call Waiting)
1
To an Extension Refusing the Call (DND Override)
5.3.1 Feature Number Table
Operating Manual 355