6.3 Profile Setup
102 Programming Manual
6.3 Profile Setup
Profiles are useful when one PC is used to connect to multiple PBXs. Rather than manually adjusting the
connection parameters each time a different PBX is accessed, it is possible to store the connection
parameters for several PBXs. Then, when you wish to connect to a specific PBX, you can simply choose
that PBX's profile from
6.1 Connect.
The functions of the buttons on this screen are as follows:
6.4 Profile Editor
Allows the creation and editing of profiles of parameters required to connect the PC to the PBX by RS-232C,
USB or modem.
Notes
When a profile is edited and saved with a new name, the original profile is not deleted.
The parameters are as follows:
Button Function
New Opens the Profile Editor window to create a new profile. See 6.4 Profile
Editor.
Edit When an existing profile is selected, opens the Profile Editor window to
modify the parameters of that profile. See
6.4 Profile Editor.
Delete When an existing profile is selected, deletes that profile. A confirmation
message will be displayed.
Close Closes the current window.
Parameter Description
Profile Name Enter a name used to identify this set of PBX connection parameters.
This name must not be the same as another profile name.
System Password Enter the password to log on to the target PBX, if required.
Default Select the default connection method.
To Next Page
Loading...
