3.4 Status Bar
84 Programming Manual
3.4 Status Bar
The status bar is the bar at the bottom of the Maintenance Console window that displays information on the
current state of the Maintenance Console software.
The information displayed is as follows, in order from left to right:
View Tool Bar
Programmer
Code Change
Installer Level
User Level
Screen Customize
System Data Setting Menu
Utility Firmware Upgrade
Quick Setup
System Reset Normal
Default
System Data Clear
DISA OGM Clear
BV Card Initialization
Window Cascade
Tile Horizontally
Tile Vertically
Help Help
About
Area Values Description
Software Mode Initial Mode
Batch Mode xxxx
Interactive Mode
See 3.3 Software Modes.
In Batch Mode, the current system data file
name is shown in place of “xxxx”.
Menu Submenu Initial Mode Batch Mode Interactive
Mode
ABAB
To Next Page
Loading...
