Panasonic KX-TA824 - DISA Incoming Assignment; DISA AA Wait Time; DISA Tone after Security Code

2.2 PT Programming—Procedures
54 Programming Manual
[516] DISA Incoming Assignment
Enables receiving calls from DISA for each extension.
Feature Manual References
1.1.41 Direct Inward System Access (DISA)
[517] DISA AA Wait Time
Specifies the length of time after entering a first digit in which the caller must dial the second digit before the
DISA AA Service activates.
Conditions
• This program is available only when "With AA" is selected in [500] DISA Incoming Call Dial Mode.
Programming Manual References
[500] DISA Incoming Call Dial Mode
[501] DISA Built-in AA
Feature Manual References
1.1.41 Direct Inward System Access (DISA)
[518] DISA Tone after Security Code
Enables the PBX to send a short beep to the caller when the entered number is the same as one of the
DISA security codes.
Programming Manual References
[512] DISA Security Code
Feature Manual References
1.1.41 Direct Inward System Access (DISA)
5 1 6
NEXT
extension jack no.
STORE END
(01
…
24/ )
SELECT
SELECT
NEXT PREV
or
To continue
To continue
( Enable/
Disable)
5 1 7
NEXT SELECT STORE END
(1
…
5 s)
2 s
5 1 8
NEXT SELECT STORE END
( Enable/Disable)