Panasonic KX-TA824 - Caller ID Checksum; Call Forwarding Selection; TRS Check after Answering

2.2 PT Programming—Procedures
Programming Manual 77
[915] Caller ID Checksum
Enables or disables selection of the checksum mode. Normally, it should not be necessary to change the
default setting.
Feature Manual References
1.1.28 Call Waiting Caller ID
1.1.30 Caller ID
[963] Call Forwarding Selection
Enables the PBX to forward the calls received on outside (CO) lines programmed as "Normal" in [414-416]
CO Line Mode—Day/Night/Lunch. If this program is disabled, outside (CO) line calls cannot be forwarded
even if the extension user has set the FWD feature.
Conditions
• This program also functions for outside (CO) line calls via the DISA Intercept Routing feature, and
when DISA calls are received by a DISA ring group.
Programming Manual References
[414-416] CO Line Mode—Day/Night/Lunch
Feature Manual References
1.1.11 Call Forwarding (FWD)—All Calls
1.1.12 Call Forwarding (FWD)—Busy/No Answer
1.1.13 Call Forwarding (FWD)—Follow Me
[966] TRS Check after Answering
Specifies whether the PBX checks DTMF signals when answering calls or not.
9 1 5
NEXT SELECT STORE END
( Enable/Disable)
9 6 3
NEXT
extension jack no.
STORE END
(01
…
24/ )
SELECT
SELECT
NEXT PREV
or
To continue
To continue
(Enable/
Disable)
9 6 6
NEXT SELECT STORE END
(Enable/ Disable)