Panasonic KX-TA824 - Message Waiting for Another Extension; SLT Message Waiting; LCS Recording Mode Set

2.2 PT Programming—Procedures
Programming Manual 61
Conditions
• If "Connect" is not assigned for the jack that is connected to the Panasonic wireless phone, the
wireless phone may function incorrectly.
[618] Message Waiting for Another Extension
Specifies whether an extension can use the Message Waiting for Another Extension feature. If this program
is disabled, an extension user cannot use a button as a Message for another extension button.
Feature Manual References
1.1.83 Message Waiting for Another Extension
[619] SLT Message Waiting
Enables the PBX to send dial tone 3 as a message waiting notification to an SLT.
Feature Manual References
1.1.82 Message Waiting
[620] LCS Recording Mode Set
Selects whether a message will continue being recorded in an extension's mailbox or stop being recorded,
when the extension user answer the call while monitoring.
6 1 8
NEXT
extension jack no. name*
STORE END
(01
…
24/ )
SELECT
SELECT
NEXT PREV
or
To continue
To continue
( Enable/
Disable)
6 1 9
NEXT
extension jack no. name*
STORE END
(01
…
24/ )
SELECT
SELECT
NEXT PREV
or
To continue
To continue
(Enable/
Disable)
6 2 0
NEXT
extension jack no. name*
STORE END
(01
…
24/ )
SELECT
SELECT
NEXT PREV
or
To continue
To continue
( Stop recording/
Keep recording)