Panasonic KX-TA824 - SLT Ring Wait Time for New Call; SLT Caller ID; SLT Fixed Bell Pattern

2.2 PT Programming—Procedures
64 Programming Manual
[627] SLT Ring Wait Time for New Call
Selects the length of time the ringing for a call is delayed when the call follows immediately after the previous
unanswered call. When receiving 2 calls in quick succession, for example, when a call waiting in a queue is
directed to an extension immediately after the previous call stops ringing, some SLTs require a pause, after
the first call stops ringing, to receive the second call's Caller ID information.
Feature Manual References
1.1.30 Caller ID
[628] SLT Caller ID
Enables the PBX to send Caller ID information to an SLT.
Feature Manual References
1.1.30 Caller ID
[629] SLT Fixed Bell Pattern
Selects the fixed ring tone pattern of an SLT for incoming calls (intercom calls and outside (CO) line calls).
The same pattern as used by your telephone company may be selected.
Feature Manual References
1.1.30 Caller ID
1.1.108 Ring Tone Pattern Selection
6 2 7
NEXT
extension jack no. name*
STORE END
(01
…
24/ )
SELECT
SELECT
NEXT PREV
or
To continue
To continue
(0
…
15 s)
0 s
6 2 8
NEXT
extension jack no. name*
STORE END
(01
…
24/ )
SELECT
SELECT
NEXT PREV
or
To continue
To continue
(Enable/
Disable)
6 2 9
NEXT
extension jack no. name*
STORE END
(01
…
24/ )
SELECT
SELECT
NEXT PREV
or
To continue
To continue
( Disable/
Single/Double)