2.2 PT Programming—Procedures
74 Programming Manual
[903] Caller ID Modification for Long-distance Calls
Selects the number of digits to be removed from the beginning of the incoming caller's number and the
number to be added in place of the removed digits for long-distance calls.
Feature Manual References
1.1.18 Call Log, Incoming
1.1.30 Caller ID
[904] Caller ID Log Priority
Selects which caller information is shown first on the display of the PT.
Conditions
• This program is available when the Caller ID service provides both a name and a number. If only
the number is provided, this program is not necessary.
Feature Manual References
1.1.18 Call Log, Incoming
1.1.30 Caller ID
1.1.43 Display Information
[906] Caller ID SMDR Format
Selects whether a caller's telephone number is printed out on SMDR or not.
Conditions
• Even if a name is also sent by the Caller ID service, only the number is printed.
9 0 3
NEXT
removed digits
STORE END
(0
…
9)
added number
STORE END
Max. 4 digits
(0
…
9, , #)
➞
<Select the removed digits>
<Select the added number>
0
1
9 0 4
NEXT
extension jack no.
STORE END
(01
…
24/ )
SELECT
SELECT
NEXT PREV
or
To continue
To continue
( Name/
Number)
9 0 6
NEXT
(Without CID: Not printed/
With CID: Printed)
END
SELECT
STORE
To Next Page
Loading...
