Panasonic KX-TA824 - BV Access Code through CO Line; BGM Control for APT

2.2 PT Programming—Procedures
Programming Manual 63
[625] BV Access Code through CO Line
Specifies a voice message access code used to play back and/or erase voice messages through outside
(CO) lines.
Conditions
• A voice message access code should be different from the corresponding extension number. If the
voice message access code is the same as an extension number, dialing that number will access
the extension, not the voice message area.
• A code that starts with a number already assigned as another code cannot be used. For example,
if you assign the codes "1234" and "12345", "12345" cannot be selected since "1234" will be
recognized first.
Feature Manual References
1.1.8 Built-in Voice Message (BV)
[626] BGM Control for APT
Enables the user to turn BGM on and off by dialing "1" while the extension is on-hook and idle.
Feature Manual References
1.1.7 Background Music (BGM)
6 2 5
NEXT
extension
jack no.
STORE END
(01
…
24)
SELECT
NEXT PREV
or
To continue
To continue
voice message
access code
4
…
10 digits
(0
…
9, #)
extension jack no. 01-24=
#101-#124
6 2 6
NEXT
extension jack no.
STORE END
(01
…
24/ )
SELECT
SELECT
NEXT PREV
or
To continue
To continue
(Enable/
Disable)