2.2 PT Programming—Procedures
Programming Manual 17
2.2 PT Programming—Procedures
Notes
• means default value throughout these programming instructions.
• means to select "All" throughout these programming instructions.
• The following are displayed when you store a number, such as a telephone number, or feature
number:
P: PAUSE; -: CONF; F: FLASH/RECALL; [ ]: INTERCOM
x: PAUSE (substitutes for any number [i.e., wild card])
• To return to the previous programming item, press .
• To correct a wrong entry, press CLEAR and then enter the new input.
• To delete a stored parameter, press CLEAR, enter the new input, and then press STORE.
• Press or to scroll the display.
• Some programs cannot have a value left empty.
[000] Date & Time
Selects the date and time of the PBX. The date and time will be shown on the displays of PTs and SMDR.
Conditions
• The clock starts immediately after the STORE button is pressed.
• The PBX supports years from 2000 to 2099.
Feature Manual References
1.1.43 Display Information
1.1.112 Station Message Detail Recording (SMDR)
0 00
NEXT
year
(00
…
99) (
Jan.
…
Dec.
)
SELECT
➞
➞ ➞ ➞
➞ ➞
hour
(1
…
12) (00
…
59) (AM/PM)
day
(1
…
31)
(
Sun
…
Sat
)
SELECT
minute
STORE END
SELECT
05
12 00
1
Jan.
Sat AM
To Next Page
Loading...
