2.2 PT Programming—Procedures
Programming Manual 21
Programming Manual References
[007] Time Service Start Time
Feature Manual References
1.1.114 Time Service
[007] Time Service Start Time
Enables the start times of each time service mode and end time of lunch mode for each day of the week.
Conditions
• This program is available when switching mode is enabled in automatic mode in [006] Time Service
Switching Mode.
• * Pressing SELECT shows the previous entry. When the display shows "None", press SELECT to
set the start time.
Programming Manual References
[006] Time Service Switching Mode
Feature Manual References
1.1.114 Time Service
[008] Operator Assignment
Selects the extension jack number to be designated as the operator.
Conditions
• To delete (disable) an extension jack number, press CLEAR in the extension jack number step.
0 0 7
NEXT
SELECT
(00
…
59)
(AM/PM)
(Day/Night/
Lunch-start/
Lunch-end)
minute
STORE END
SELECTSELECT
(Every day)
NEXT PREV
or or
(1
…
12)
or
hour
To remain the settings unchanged,
keep pressing SELECT until "None" is displayed
To go to another day of the week
To go to another mode
➞ ➞
➞
(Sun
…
Sat)
SELECTSELECT
*
Every day,
Day: 9:00 AM, Night: 5:00 PM,
Lunch-start
: None,
Lunch-end
: None
0 0 8
NEXT
extension jack no.
STORE END
(01
…
24/Disable)
jack 01