Panasonic KX-TA824 - DISA Security Code Digits; DISA Ringback Tone; 3-Level AA Assignment

2.2 PT Programming—Procedures
Programming Manual 55
[530] DISA Security Code Digits
Selects the number of digits for the DISA security codes.
Conditions
• When this setting is changed, DISA security codes that have already been assigned in [512] DISA
Security Code will be cleared.
Programming Manual References
[512] DISA Security Code
Feature Manual References
1.1.41 Direct Inward System Access (DISA)
[531] DISA Ringback Tone
Selects whether to send a ringback tone or Music on Hold to the caller when a DISA call is received.
Feature Manual References
1.1.41 Direct Inward System Access (DISA)
[540-549] 3-level AA Assignment
Specifies the destinations of the DISA AA numbers as directed by 3-level DISA OGMs. Depending on the
type of destination selected, it may also be necessary to select a specific destination (Extension/Extension
Group).
Conditions
• This program is available only when "3-level AA" is selected for each AA number in [501] DISA
Built-in AA.
• Only when you select " " as the third AA number, you can select "3-level AA" in the next step.
5 3 0
NEXT SELECT STORE END
(4
…
10 digits)
4 digits
5 3 1
NEXT SELECT STORE END
( Ringback Tone/
Hold Music)
5 X
NEXT END
(40
…
49)
NEXT PREV
or
To continue
name*
SELECT
(Jack/GRP/
3-level AA/
Not Stored)
(0
…
9, )
second
AA no.
third
AA no.
(0
…
9)
(01
…
24)
extension
jack no.
extension
group no.
(1
…
8)
or
[ : Skip]
STORE
Go to another third AA number
Go to next or prev.
third AA number
[40-49: AA no. 0-9]