Panasonic KX-TA824 - Page 130

9.1 System [1]
130 Programming Manual
Default
30 s
Value Range
15 s, 30 s, 1 min, 2 min
Programming Manual References
[201] Transfer Recall Time
Feature Manual References
1.1.25 Call Transfer—To Extension
Start Time—Call Forwarding
Selects the length of time before a call is forwarded when the call is not answered.
Default
15 s
Value Range
5 s, 10 s, 15 s, 20 s
Programming Manual References
[202] Call Forwarding Start Time
Feature Manual References
1.1.12 Call Forwarding (FWD)—Busy/No Answer
Start Time—Hot Line
Selects the length of time until automatic dialing starts after a single line telephone (SLT) user goes off-hook.
Default
3 s
Value Range
0–4 s
Programming Manual References
[203] Hot Line Waiting Time
Feature Manual References
1.1.66 Hot Line
Call Duration—Call Duration Counter Start Time
Selects when the call timer starts, either immediately after an outside (CO) line is seized, or after the end
of dialing. This corresponds to the length of the conversation displayed on the LCD and logged by SMDR.