9.2 Extension [2]
Programming Manual 163
Page 1
Jack
Indicates the jack number (reference only).
Value Range
01–24
Extension
Indicates the extension number and name (reference only).
Value Range
Extension no. and name specified in Ext. no. and Name on the 9.1.3 Numbering Plan [1-3] screen
Programming Manual References
9.1.3 Numbering Plan [1-3]—Ext. no., Name
Line Preference—Outgoing
Selects the line to be seized after going off-hook to make a call.
Default
All jacks: No Line
Value Range
No Line, Idle Line, CO 1–8
To Next Page
Loading...
