To Next PageTo Next Page
What to do if my Panasonic PBX phone doesn't have a feature button?
If your Panasonic PBX proprietary telephone does not have a feature button, it could be because some models do not have the feature button. Change a flexible button to the desired button. Alternatively, enter the specified feature number instead of the feature button.
Why aren't parallel single line phones ringing on my Panasonic KX-TDA30 PBX?
If the paralleled single line telephones do not ring on your Panasonic PBX, "No ring" may be selected. Change the setting to ring.
General| Number of users | 52 user(s) |
|---|---|
| DECT connectable | Yes |
| Number of DECT cell stations | 4 |
| RS-232 ports | 1 |
| RJ-11 ports quantity | 2 |
| AC input voltage | 110-240 V |
| AC input frequency | 50 - 60 Hz |
| Power consumption (typical) | 55 W |
Weight and Dimensions| Weight | 3500 g |
|---|---|
| Dimensions (WxDxH) | 275 x 117 x 376 mm |
