101
4. Recording mode
Available Shutter Speeds (Sec.)
[EFC] [T] (Time, max. approx. 60 seconds), 60 to 1/500
[ESHTR] 1 to 1/16000
• The effects of the set aperture value and shutter speed will not be visible on
the recording screen.
To check the effects on the recording screen, use [Preview]. (106)
You can set the preview mode to operate constantly in [
] mode.
[
] [ ] [Constant Preview] (343)
• The brightness of the recording screen and of actual recorded images may
differ.
Check the images on the playback screen.
• When using a lens with an aperture ring, set the position of the aperture ring
to other than [A] to use the aperture value of the lens.
• Shutter speeds faster than 1/50 of a second are not available when you fire
the flash. (232)
• You can customize dial operations:
[
] [ ] [Dial Set.] [Assign Dial (F/SS)]/[Rotation (F/SS)] (340)
• The recording screen can display an exposure meter indicating the
relationship between aperture value and shutter speed:
[
] [ ] [Expo.Meter] (347)
Manual Exposure Assist
When ISO sensitivity is set to other than [AUTO], Manual Exposure Assist
(Example:
) will be displayed on the recording screen.
You can check the difference between the current exposure value and the
correct exposure (±0) measured by the camera.
• Use Manual Exposure Assist as a guide.
We recommend checking the images on the playback screen when recording.
To Next Page
Loading...
