385
14. Wi-Fi/Bluetooth
6
Scan the QR code displayed on the screen of the camera
using “LUMIX Sync”.
• (iOS devices) When a message to confirm the change of destination is
displayed, select [Join].
Manually entering a password to connect
Display the screen in Step 1 on page 384.
In the setting menu of the smartphone,
turn the Wi-Fi function ON.
On the Wi-Fi setup screen, select the
SSID
displayed on the camera.
(At the first connection)
Enter the password
displayed on the
camera.
On the smartphone, start up “LUMIX
Sync”.
To Next Page
Loading...
Need help?
General
