94
4. Recording mode

Program Shift
You can change the shutter speed and aperture value combination set
automatically by the camera while maintaining the same exposure.
With this, you can, for example, make the background more defocused
by decreasing the aperture value or capture a moving subject more
dynamically by slowing the shutter speed.
Press the shutter button halfway.
• This displays the aperture value and shutter speed value on the recording
screen. (Approx. 10 seconds)
Rotate or while the values are
displayed.
• This displays the Program Shift icon on
the recording screen.
Start recording.
Canceling Program Shift
– Set the camera on/off switch to [OFF].
– Rotate
or until the Program Shift icon disappears.
• Program Shift is not available when using the following functions:
– Flash
– [4K PHOTO], [Post Focus]
– [
] (ISO sensitivity)
• You can customize dial operations:
[
] [ ] [Dial Set.] [Rotation (F/SS)] (340)
• The recording screen can display an exposure meter indicating the
relationship between aperture value and shutter speed:
[
] [ ] [Expo.Meter] (347)
To Next Page
Loading...
Need help?
General
