99
4. Recording mode
2
Set the shutter speed.
● Rotate or .
3
Start recording.
• If the correct exposure is not achieved
when the shutter button is pressed
halfway, the aperture value and the
shutter speed blink red.
• The effects of the set aperture value and shutter speed will not be visible on
the recording screen.
To check the effects on the recording screen, use [Preview]. (106)
• The brightness of the recording screen and of actual recorded images may
differ.
Check the images on the playback screen.
• Shutter speeds faster than 1/50 of a second are not available when you fire
the flash. (232)
• You can customize dial operations:
[
] [ ] [Dial Set.] [Assign Dial (F/SS)]/[Rotation (F/SS)] (340)
• The recording screen can display an exposure meter indicating the
relationship between aperture value and shutter speed:
[
] [ ] [Expo.Meter] (347)
To Next Page
Loading...
Need help?
General
