357
Others
• The shutter speed will become slower and the Optical Image Stabiliser function may not work
properly when taking pictures especially in dark places.
> We recommend holding the camera firmly with both hands when taking pictures. (P62)
> We recommend using a tripod and the self-timer (P186) when taking pictures with a slow
shutter speed.
• Is there any memory remaining on the card?
• Is the ISO sensitivity high or the shutter speed slow?
([Sensitivity] is set to [AUTO] when the camera is shipped. Therefore, when taking pictures
indoors etc. noise will appear.)
> Decrease the ISO sensitivity. (P174)
> Increase the setting for [Noise Reduction] in [Photo Style] or lower the setting for each of
the items other than [Noise Reduction]. (P130)
> Take pictures in bright places.
> Set the [Long Shtr NR] to [ON]. (P144)
• Is the [Picture Size] (P139) or the [Quality] (P140) set low?
• Is the [Digital Zoom] set? (P215)
The recorded picture is blurred. The Optical Image Stabiliser is not effective.
Taking pictures using White Balance Bracket is not possible.
The recorded picture looks rough.
Noise appears on the picture.
Striping or flicker may appear under lighting such as fluorescent lighting and
LED lighting fixture.
•
This is characteristic of MOS sensors which serve as the camera’s
pickup sensors.
This is not a malfunction.
• When you see noticeable flicker or striping while recording a motion
picture, you can reduce the flicker or striping by setting up [Flkr
Decrease] (P236) and fixing the shutter speed. It is possible to select a
shutter speed from [1/50], [1/60], [1/100], or [1/120].
You can set the shutter speed manually in the Creative Video Mode.
(P125)
To Next Page
Loading...
Need help?
General
Weight and Dimensions
