17. Materials
514
0
At the time of purchase, this camera is set to use a workgroup name of
“WORKGROUP”.
If you have changed the workgroup name of the PC, this will not be recognized.
In the [Wi-Fi Setup] menu, [PC Connection], change the workgroup name of the PC
to which to connect. (l 468)
0
Check that the login name and password are correctly typed.
0
When the clock settings of the PC connected to the camera differs considerably from
those of the camera, the camera cannot be connected to the PC depending on the
OS.
0
Is the size of the image too large?
– Reduce the image size at [Size] (l 466), and then send.
– Transmit after dividing the video with [Video Divide] (l 318).
0
File format of the video that can be sent differs depending on the destination.
(l 445)
0
In the [Setup] ([Setting]) menu, [Reset], reset network settings. (l 76)
However, all information set in [Wi-Fi Setup] and [Bluetooth] will also be reset.
(With the exception of [LUMIX CLUB])
The PC is not recognized when I use a Wi-Fi connection.
The camera cannot be connected to the PC using the Wi-Fi function.
It takes time to transmit an image to the web service.
Transmission of the image fails midway.
Some images cannot be transmitted.
I have forgotten the password for the Wi-Fi.
To Next Page
Loading...
