EasyManua.ls Logo

Panasonic MINAS A5 Series - Servo-ON;OFF

Panasonic MINAS A5 Series
477 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
2-64
input coupler
OFF
input coupler
OFF
input coupler ON
engaged *3 released
not-energized
engaged *3
*4
not-energized *5energized
Output Tr OFF
Output Tr.ON
engaged (OFF)released (ON)
No servo-ON until the motor speed
falls below approx. 30r/min.
1 to 5ms
approx.60ms
Setup value of
Pr4.38
Setup value of
Pr4.38
when setup
value of Pr4.38
is shorter
approx.4ms
approx.30r/min
Dynamic brake
Motor energization
Motor rotational
speed
Motor rotational speed
servo validated
External brake
release output
(BRK-OFF)
Servo-ON input
(SRV-ON)
when time to fall
below value of
Pr4.39 is shorter
Motor rotational
speed
Setup value of
Pr4.39
Motor rotational
speed
Setup value of
Pr4.39
at Servo-ON at Servo-OFF
t1 *1
t1 *1
Output Tr OFF
Servo-ON/OFF Action While the Motor Is in Motion
Remarks
7LPLQJDWHPHUJHQF\VWRSRUWULS'RQRWUHSHDWWKLVVHTXHQFH
Caution
*1. t1 will be a shorter time of either the setup value of Pr4.38 “Mechanical brake action
at running setup” or elapsing time for the motor speed to fall below
Pr4.39 “Brake re-
lease speed setup”
.
*2. Even though the SRV-ON signal is turned on again during the motor deceleration,
Servo-ON will not be activated until the motor stops.
*3. For the action of dynamic brake at alarm occurrence, refer to an explanation of
Pr5.06, “Sequence at Servo-OFF” as well.
*4. Servo-ON will not be activated until the motor speed falls below approx. 30r/min.
*5.
For the motor energization during deceleration at Servo-OFF depends on the setup value
of Pr.5.08, “Sequence at Servo-OFF”.
Related page
3´'\QDPLFEUDNHµ
2
Preparation
10.
Timing Chart
Servo-ON/OFF
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com

Table of Contents

Related product manuals