213
8
Appendix
Data being recorded
This message appears when you try to switch to Q mode
while an image is still being recorded, or when the protect
setting or DPOF setting is being changed. It disappears
after the image is recorded or the setting is changed.
Data being processed
This message appears when the camera takes more than
five seconds to display an image due to image processing,
or when the SD Memory Card or the built-in memory is
being formatted.
Built-in memory full Displayed if the built-in memory is full when saving a file.
No image to be
processed
Displayed when there are no images.
This image cannot be
processed
Displayed for files that cannot be processed.
No card in the camera Displayed when no SD Memory Card is inserted.
Available memory on
card is insufficient to
copy the images
Displayed when there is insufficient memory on an SD
Memory Card to perform copying.
Available built-in
memory is insufficient to
copy the images
Displayed when there is insufficient built-in memory to
perform copying.
Cannot process
correctly
Displayed when Natural Skin Tone or Red-eye
Compensation processing fails.
Message Description
To Next Page
Loading...
Need help?
General
