35
1
Getting Started
Use of the AC adapter kit K-AC122 (optional) with a household power
supply is recommended if you intend to use the camera for a long time
or connect it to a computer.
1
Make sure that the camera is turned off and open the
battery/card cover.
2
Remove the battery.
Refer to p.32 - p.33 on how to open/close the battery/card cover and
remove the battery.
3
Insert the DC coupler while holding down the battery
lock lever.
Confirm the DC coupler is locked in place.
4
Extract the DC coupler cord.
Pull out the tab at the joint of the camera and the battery/card cover so
that the DC coupler cord is extracted from there.
5
Close the battery/card cover.
Using the AC Adapter
AC plug cord
AC adapter
DC
coupler
DC terminal
DC coupler cord
To Next Page
Loading...
