Pentax OPTIO VS20 - Setting the Movie SR (Movie Shake Reduction) Function

125
3
Taking Pictures
5 Use the four-way controller (23)
to select the number of recorded
pixels and frame rate.
6 Press the 4 button.
The setting is saved.
7 Press the 3 button.
The camera returns to capture status.
You can correct camera shake while you are recording a movie with the
Movie SR (Movie Shake Reduction) function.
1 Press the 3 button in A mode.
The [A Rec. Mode] menu appears.
2 Press the four-way controller (5) or turn the zoom lever
to the right (y).
The [C Movie] menu appears.
3 Use the four-way controller (23) to select [Movie SR].
4 Use the four-way controller (45)
to select O or P.
O Corrects camera shake.
P Does not correct camera shake.
5 Press the 3 button.
The camera returns to capture status.
Setting the Movie SR (Movie Shake Reduction)
Function
Rec. Time
MENU
Cancel
OK
OK
15:02:26
Recorded Pixels
Movie SR
Filter
Movie
MENU
Recorded Pixels
Movie SR
Filter Off
Exit